PDA

View Full Version : Grip Frame Coming Loose?

Skream9
12-02-2002, 09:56 PM
I went to getmy tank filled today and me and the owner talked for about an hour. We shot about a case worth of air out of the marker and when we were done, the gripframe was pretty loose. We never noticed it being loose before shooting, but when we were done, it seemed like we could wiggle it a good amount. It was a Mamba IR3 if it makes a difference.
Jonny
12-02-2002, 10:19 PM
Tighten it down with a tiny bit of force... if your really concerned use some thread saver.
kaPPLcD
12-02-2002, 10:19 PM
Did it ever happen before?.. Coudl i recommend new screws, or tighten the screws. if it still jiggles Check if the grip frame screws are stripped.. but i dont think that coudl be likey.. if you just fill the tank.
karrkrash01
12-02-2002, 11:35 PM
Ive noticed that when you dry fire your gun there tends to be more kickback and that leads to your screws loosening easier. Every now and then when I am running air through my gun that problem pops up. Just tighten tighten them up
5150
12-03-2002, 01:00 AM
If it got loose, tighten it up. Happens all da time.
Skream9
12-03-2002, 08:30 AM
Originally posted by 5150
If it got loose, tighten it up. Happens all da time.


Otay, thanks everyone :o
GNARLY!
12-06-2002, 12:52 AM
Don’t touch it, it may cause the hyperneumonic reactor to burst causing a sudden delay in the valve timing and may cause the Ir3 to implode resulting in catastrophic failure.


Just kidding! , lol, just tighten er down. Then give er!!!
Ir3's rule!!!
kaPPLcD
12-06-2002, 03:10 PM
Originally posted by GNARLY!
Don’t touch it, it may cause the hyperneumonic reactor to burst causing a sudden delay in the valve timing and may cause the Ir3 to implode resulting in catastrophic failure.


Just kidding! , lol, just tighten er down. Then give er!!!
Ir3's rule!!!


locktite will work too. not too much tho

lol...hahah.. yea u better watch the hyperneimonic reactor..:nerd:
Skream9
12-06-2002, 03:56 PM
Originally posted by GNARLY!
Don’t touch it, it may cause the hyperneumonic reactor to burst causing a sudden delay in the valve timing and may cause the Ir3 to implode resulting in catastrophic failure.


Just kidding! , lol, just tighten er down. Then give er!!!
Ir3's rule!!!

Rar die :P Just checking to see if anyone else has had that problem.