New (used) Speed Settings question

[Mongoose]

I just purchased a mint Silver Dust Speed that was used like 4 times.

This is the First Angel I have ever owned.

The previous owner had it set up as follows. MROF 17, SENSI MODE 4 but it was always left off cause he said it hardly ever chopped anyway and the DWELL setting was maxed out.

I want to know the implications of the DWELL being set so high.

Should I lower the lowr the dwell and should I also change the sensi mode like it recommends in the SPEED setup post and actually activate the SENSI.

Thanks in advance for your help

[acoenfam1]

The dwell being so high will make the gun LOUD and waste air. Try lowering your dwell to around 12 or 14. As for playing with the Sensi that's up to you but you can't blame the gun for chopping if you're not using it. What kind of loader do you have? I use Mode 2 with my HALO and have never had a problem.

[Mongoose]

I have not used the gun yet. I have upgraded from a 2K1 Autococker witha 12V Revy. I was thinking along the lines of an EGG.

The gun didn't come with a manual.

The online manual says you can not change the DWELL until you remove the left cover grip and expose the circuit board. Once I do that will I be able change the Dwell settings using the LED buttons and follow the instructions in the Manual? I am confused because it says 'follow internal menu list diagrams fo relevant settings'. I do not know what that means.

So have I got this right?
1. Remove grip cover to expose circuit board
2. Turn on SPEED
3. Use colored buttons like you would to acces the menus with the grip still on, only now I can change the settings
4. Make DWELL adjustments and return cover

[Mongoose]

D'uh I figured out to adjust the DWELL and change the SENSI mode on my own.

[acoenfam1]

GTG have fun.