HELP!!! my angel fires like full auto!!!

[sly_guy]

i recently just bought a speed, and there is a problem. Okay im walking my trigger, and ripping on it, and then when i release the trigger completely, the speed just keeps shooting. It usually stops after like 5 or so shots. But how do i fix this problem, is it the trigger, possibly a spring in the trigger?? thanks a lot guys hope u can help!! By the way its the stock trigger!!

[IMPerfection]

This is a problem with trigger bounce.

Now we get to play 'adjust the trigger' because unfortunately, Speed's dont have TR/Debounce.

Bust open the manual, flip to the page on trigger adjustment. It might help to fiddle with the TOE first a bit to see if you can stop the bounce.

If not, begin the adjusting. Ensure you are packing some loctite.

[firemedic30]

I agree, look at the Toe. If that is not it...then probably something stuck in the OPTO switch. Then just inspect and see what it is!

[3ball]

Was curious if you run sensi on or off? I had this problem occasionally with my speed but only when sensi is on. It was occasional but got old. I tried adjusting the trigger as in the manual. The only time it seemed to work with sensi on was when the trigger was so long I hated it. Then my friend shot it and he said he thought it was still throwing some extra balls so I finally just turned it off permanently and haven't really looked back.

[acoenfam1]

I thought we went through this a while back. Adjust the TOE so your firing point is more in the back hlaf you your trigger pull. But just a tad of overtravel on the trigger then adjust to the length you perfer. It might help to install a magnet or get a trigger with a place for a return spring like the Cobra.