View Full Version : Help me with charging
crazykamakaze
05-05-2004, 11:32 PM
I bought this gun from someone off the internet and when i first got it the screen said that there were no shots so the gun is brand new. anyways i had to charge it for the first time and it wouldn't charge. I pushed everything far in and nothing happened. When i plug it in it turns on and the screen turns green and black. Like it is flashing on and off. Then when i take it out the angel shuts off. I have no reciet of purchase since i bought it off of ebay. Please someone tell me what to do.
Frank_McCrank
05-06-2004, 07:04 AM
its either a bad board or a bad charger...
crazykamakaze
05-06-2004, 09:43 AM
How much will it cost to replace either the charger or the board.
click on any of the sponsors links on the top of this page and they will have price breakdowns. Chargers I think are around 50-60 boards now on the other hand are waaay more. Might also be a bad battery, you might wanna do some more tests. Like try another charger first and swap out batteries with someone elses known to be good.
J-ROCK
05-06-2004, 10:41 AM
Make sure the toggle switch is in the "ON" position when charging the gun. You might have done this already but maybe you forgot. I hope this fixes your problem. Good luck.
CrustyVet
05-06-2004, 06:10 PM
Most likely its just another frozen battery. I had the same problem (along with thons of others here). Simple solution, if you dont have a good rc charger, take the battery to your local hobby shop. Once they zap the battery with a good voltage, it should "wake up". remember to take the battery out of the marker and do not run the charge through the board.
paulskate
05-06-2004, 10:33 PM
i had that problem also, i heard WDP sent out ALOT of a4 with bad batts
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.