LPR Will not go below 65psi, 1 Shim

[JackalVR6]

Hey Guys,
My LPR won't drop below 65psi and I have one shim left.
- 350 into mini-reg.
- Yeah I'm sure it is one shim, I know that they can stick together.
Thanks :cheers:

[cveale]

How much does it drop when you take that one shim out ?

[Emmit]

so pull the last shim out....you don't need shims...

[JackalVR6]

Yeah but then I'm only down to 60psi, and I should be able to get close to the 40's right? Or at least 50!

[smasher41]

how old is the lpr? you may need to replace the cup seal within the lpr, if it has developed a deep groove on the seal.

[52brandon]

run it at 60 for now, it should still work just fine. You don't need to lower your LPR, mine is at 57 and it works fine, very little kick
edit: just noticed that your signature said Fly, I would suggest asking in the Fly forum

[abom]

Make sure the spring order is correct, no amount of shims can compensate for that :P