Angel Problems....

[MXPBman806]

Yes, I have a 2k2 LCD Warped Sports Angel. I bought it off a someone on Pbnation, and i pulled it out of the box and turned it on, and i found out the Battery was dead, so i charged it and found out that the Battery doesnt even hold a charge. If anyone knows whats up with this tell me, i also heard that WDP had hundreds of angels out on the line with bad batteries.

Does anyone have any techniques to somewhat "jump start" the battery to hold a charge? and if that doesnt work, how much would it be for a new Battery?

[Demonic Intentions]

That my friend...is why you A) Don't get a Warped B) Why you dont get anything offa pbnation. But... hopefully you know how to charge it, if you do and it acts like it was charging, a new battery costs around $50-80. Have fun! :wink:

[MXPBman806]

ok, but its wierd....it lights up just like normal and when i stick the charger in it shows a number its 317 004...it also shows that its "charging" but 3 hours later the 4 bars still have nothing. and when i do turn it on it turns on, like normal and then fades out and shuts off.

[Gogged Sucka]

yup bad battery...get a new one.

[Vantage_TeS]

How short is the trigger adjusted? The number 317004 is your serial number, and that shows up when the trigger is held back. You gun might not be charging because the trigger is being held back (loosen up trigger adjustments).

[MXPBman806]

Aight thanks, would anyone (who reads this) have an extra battery that they would sell?


AIM - Yamaharaca806

[MXPBman806]

Ok new problem, i made some trigger slack and that is working now, its getting a charge. but now the "pin" number must have been erased...so basically im screwed over here? or what should i do?

[Vantage_TeS]

"pin" number? That 6 digit thing? Hold the trigger back to display it again...

[MXPBman806]

the 317 004?

[Vantage_TeS]

Yea. Thats not your pin, thats you guns serial number. It matches up with the number under your breech :)

[NEtrauma_Travis]

no what he means this is the message (i'm at his house) it says exactly -p in- and then when i hold the trigger in it's 000000

[MXPBman806]

yea...? Travis is tryin to help me, what do you mean under the breech?

[Vantage_TeS]

Only four digits 0000 right? Bottom button, then middle, then bottom twice to move on, and then once you got all four, top button.

[NEtrauma_Travis]

Porblem solve thanx vantage!!!

[C.Carles-AOG]

Pin is 4, serial is 6 numbers.

[MXPBman806]

aight, thanks a lot guy :)

[MXPBman806]

okay, just got back from a tourny and put some air into this. It seems to be having an air issue, its a gas hog. a friend of mine told me to take my tool kit and replace the back plate and adjust the snap ring. Is that the issue? because i have noticed that when i close the breach the pin on the bolt seems to snag a peice of the Ram, he says "that's it".


aim - Yamaharaca806

[MXPBman806]

is anyone gonna answer back?up...