angel lcd output pressure

[7thgear]

hey. i just got my lcd. what output pressure should be coming out of my nitrogen tank to make it shoot good. I hear that lcd's are high pressure. can anyone tell me what my output pressure needs to be? thanks and all help is appreciated.

[Vantage_TeS]

I run around 600psi from my AIR. Dont go much lower then that because you will starve the gun for air during rapid fire (lower pressure=higher flow rate needed, and the LCD's are not designed for high flow).

[Emmit]

the LCD manual still suggests 800psi, just like the LED's. It will perform just fine on a HP preset tank.

[Gogged Sucka]

i run 600psi into mine from a conquest works good

[MajorGunHo]

Friend of mine is getting an LCD and he has a preset 400 psi. Will it work??

[Emmit]

likely not very well...as stated above the manual recommends 800 psi, the LCD is a HP marker, and will not take to well to being starved for air.

[MajorGunHo]

heheheehehe....now I need to convince him to buy a new tank....hehehe :aww:

[rise]

drop it to lp, then he can use his tank. search for snertz's "pressure theory"

i did this mod, and i can run my lcd at 300 psi

[MajorGunHo]

Snert'z Pressure Theory?? I'll do that, how much a mod like taht run at??

[MajorGunHo]

price wise, is waht I ment by "run at??"

[Dzastrow]

i just searched it, found nothing

[MajorGunHo]

:dito:

Couldn't find anyhting, maybe a link please?

[rise]

it'll cost you your time of less than an hour if you have the angel tool kit and allen wrenches :)

here's the link
http://www.angel-owners.com/showthread.php?t=18785&highlight=pressure+theory