my mini reg is loose

[db lcd]

my mini reg is loose. I took out the screw that appears to keeping it tight, but it did nothing. It seems to jiggle left to right.

what can i do to tighten it?

[Vantage_TeS]

Unscrew the regulator, inside there should be a black screw. Make sure that is tight as well as the silver screw that is just in front of the grip frame.

[db lcd]

do i just start twisting my reg? or do i have to remove any screws?

[Syentific]

Just start twisting. Look up into your asa when you get the reg out and there is a black hex bolt in there. Tighten that and it should tighten it up...assuming of course this bolt is your problem in the first place.

Did you get a manual with your gun? They are vary handy and I think you can download them here :tunes:

[Vantage_TeS]

manual for lcd is: http://www.angel-owners.com/manuals/lcd

Its just like a tank (in face you can screw an tank vertically into there...but dont do that!) you just unscrew it. You will find that it is alot easier to remove it if you disconnect the macroline first.