My lcd trigger

[7thgear]

hey everyone. i just got my 01 angel lcd. the trigger has a lot of side to side play in it. Does anyone know how i can stop the side to side play without taking apart the gun? If there is no way, then how would i fix it with the gun apart? thanks in advance. all help is appreciated.

[Demonic Intentions]

Adrenalin will do trigger mods for you for a fair price. Only downside is you have to have one of their triggers.

[Syentific]

You are not going to get a long term solution with out taking apart the gun. You can try wedging something in there or even tapping a screw hole in the side and putting a wax (or plastic) set screw (or cocker sear screw) in ther to push on the side of the trigger and that will take care of the wobbles, but the best way to take a lot of slop out is just to buy a decent aftermarket trigger. Most of them cure that problem or at least make it tolerable.

[Dzastrow]

or you can get a new trigger, i got my lcd off of ebay and it came with a lasoya trigger, i dont know tht they make these anymore but im sure theres an aftermarket lcd trigger that takes out side to side play, my lasoya has NO side to side play what so ever.

on the down side it would not fit in my space frame becuz the space frame is designed to make the stock trigger have no side to side play.

[creepingdeath_60]

some people put tape on both sides of the trig in the frame, but thats gimp. Find small very thin washers and shimm it. there are small enough washers out there to do it believe me my friend did ut to his 2k lcd and it worked great