question

[Infinity20k]

i have a 2k2 dark lcd angel and i was wondering what the dwell is its set at 14 i have seen other at higher or lower dident know what it ment and also im using a revy hopper and the dark angle barrles and i seem to be chopping like crazy any ideas the bore is corrrect

[Vantage_TeS]

Dwell is how long the the valve is held open. Basically the volume of air fired per ball.

If your gun is chopping alot, its probably because your ram needs to be adjusted. There is a number of things to check for, but if its accually chopping and not barrel breaks then its usually the ram.

[Infinity20k]

what should it be at?? im using 47 3000 pmi tank

[rise]

if the "it" you are talking about is the dwell, leave it at 14. adjusting your ram can be seen in your manual or there's one in the "More!" section of this site. basically if your ram isn't adjusted correctly, the bolt might be slamming into the ball causing it to break.

[Infinity20k]

is it hard to adajust the ram?

[Vantage_TeS]

Nope, it tells you how to right in you manual. Page 28.