PDA

View Full Version : Gas pressure help please.


ToxicPaintballz
04-08-2004, 06:42 PM
Ok I just purchased my Fly, slapped on my tank and gassed it up. Unfortunately, I forgot to charge my Angel, so I cant shoot the remaining gas out. Will it be ok to let it charge while there is some gas in it, or should i pull out the macroline?

thog94
04-08-2004, 06:53 PM
You should be fine leaving the air in the marker while it charges, after a while it might even dissapate. If you don't feel comfortable you can always go live with the marker after a few minutes of charging to discharge the air.

Emmit
04-08-2004, 06:53 PM
no worries about it...let it sit for a bit on the charger then you should be able to shoot out the air in about half an hour...then put it back on the charger til it's done.

ToxicPaintballz
04-08-2004, 07:09 PM
Oops, what bad luck my friend just said "cut the macro!" so I listened and.....now Ive got a 1" piece of macro stuck in my fitting :( Talk about bad luck! Plus my mom is at the Leafs game so I cant charge till shes back.

ToxicPaintballz
04-08-2004, 07:11 PM
I AM VICTORIOUS! I managed to pry out the macro! WDP really needs to include a house-charger!

Reverserewind
04-08-2004, 07:19 PM
Hey man welcome to the board BTW. There are a few posts in the A4 section that you'll probably find useful in learning about the gun and setting it up and I'm sure over the next week there will be a lot of really useful posts in the Fly section also. Just keep reading everything you can on here most of these guys have a lot of good information already on the forum.

Rick@ImpactPaintball.com
04-08-2004, 09:16 PM
Everyone does want a house charger but from what i understand is that since angels are sold in alot of countries they would have to get alot of approvals and licenses for each country because of the diffrences in the plugs. the car adapter is pretty much the only universal thing to get electricty from.
Master Angel tech shops do carry a WDP approved adapter for your house that you can plug your angel into. Call impact tomorrow or another tech shop and they can give you the low down on them.

Ricker
www.impactpaintball.com

Jouster
04-08-2004, 10:02 PM
Oops, what bad luck my friend just said "cut the macro!" so I listened and.....now Ive got a 1" piece of macro stuck in my fitting :( Talk about bad luck! Plus my mom is at the Leafs game so I cant charge till shes back.
Extra-funny part is, just cutting the macro line doesn't degas the gun.

Jouster