Strange sensi prob

[CHUCK MEYER]

I do the drop test it reads 9 out of 10, Then I shoot the first few slow to calibrate,then let it rip 30-40 balls later the gun(sensi) acts like it is out of paint. I shoot thru it (slow of course) then 20-30 balls like nothing is wrong. Then back to the 1 ball blues. I checked the sensi sensor it looks ok so I changed my sensi rod. No change
PLEASE HELP :wall: :wall:

[p8ntbllr2001]

u maight have to replace the sensor all together

[PlazmaSpeed]

I do the drop test it reads 9 out of 10, Then I shoot the first few slow to calibrate,then let it rip 30-40 balls later the gun(sensi) acts like it is out of paint. I shoot thru it (slow of course) then 20-30 balls like nothing is wrong. Then back to the 1 ball blues. I checked the sensi sensor it looks ok so I changed my sensi rod. No change
PLEASE HELP :wall: :wall:


You may need a new sensi pad, you can pick one up from the sponsors, before that take down the sensi and clean out the hole, and clean the rod, then reassemble see if that works if it doesn't go to any one of the sponsors and order a new sensi pad and rod.

[Solitary Echo]

Yeah, make sure you clean it well before you start ordering everything.

[PlazmaSpeed]

Oh also forgot, when you disassemble the marker make sure you're not pinching any wires from the sensi into the opto board, that'll really screw you up.

[Woogie12]

Try putting some grease where the rod and sensor meet. You're rod could be bouncing, giving false signals in calibration, then it misses the balls when you are shooting. Just a suggestion.

[DeDSoL]

also when your cleaning your sensirod, take a soft grain sandpaper and slowly swipe the top of the sensi rod along the edge. not to a point but to where its less flat and more like the corner of a stop sign(best i can explain it)

normal =
__
| |
| |


sanded=
_
/ \
| |
| |

[CHUCK MEYER]

I ordered the new pad and rod and a soft face (I needed 1 anyhow) thanks for all the help

[PlazmaSpeed]

I ordered the new pad and rod and a soft face (I needed 1 anyhow) thanks for all the help


did cleaning everything not help then?

[CHUCK MEYER]

I dont know parts where ordered from performance angel before I got back online. Working 2 jobs sometimes puts me short on time if cleaning does work no harm no foul extra parts arent a bad thing

[PlazmaSpeed]

I dont know parts where ordered from performance angel before I got back online. Working 2 jobs sometimes puts me short on time if cleaning does work no harm no foul extra parts arent a bad thing


That's true, but I'll pass a little info on that I've learned while studying automotive tech. Its cheaper to troubleshoot your problem than it is to just start replacing parts.

[CHUCK MEYER]

Also a auto tech, parts ordered prematurly(sp) but it looked like a small crack in sensor anyhow. What is your area of autos is your specialty. Mine is electrical

[Paul Rush]

does anyone know where i can get a new sensor pad for my sensi on my angel speed

[Crazy Train]

All of the sponsors have them. Call them up!