Speed shooting uncositently need help

[archangel66]

Hi guys i just got my new speed unfortunately i ididnt have enough money for a Angel A.I.R so i tested my gun with my smart parts max flow, unfortunately once again my maxflow has a leak in the reg as i was told so chronoed my gun at first it shot at 135 so i adjust the mini reg and fired 4 more shots it went 165 so i adjusted it some more and i got 261 260 but then after testing it again it started jumping everywhere from 261 260 160 181 140 even 131 the tech at the field was puzzled and he said are you losing air your tank might have a leak by the way the maxflow is at 175 psi goes all the way too 700 psi what i wanted to know was is this fine and is the problem gonna be fixed when i get the maxflow fixed or is the speed not compatible with the maxflow? thanks any info would help im also a nooob with angels so any help would be appreciated thanks

[thog94]

Are you running HP or LP on the flo? By looking at the post, it looks like you need to rebuild the reg or at least get the leak fixed.

[archangel66]

rebuild the reg on the flo and i think its Lp it was originally on a rat impulse thanks for feedback

[thog94]

The LP on the Max flo isn't enough, it only puts out 350 max and you need at least 400, you need to run HP on it.

[archangel66]

thanks for all your help where would i be able to buy the things needed to make it HP once again thanks should i get a volumizers anything else that i should get

[thog94]

A volumizer would help you to drop the OP of the gun and a tool kit is always handy. As far as getting a HP set up for the flo, I would take it back to the store where I got it or try to contact some of our sponsors to see if they have it.

[PlazmaSpeed]

thanks for all your help where would i be able to buy the things needed to make it HP once again thanks should i get a volumizers anything else that i should get


You can also look to see if SP has a rebuild kit for your Maxflow.

[p8ntbllr2001]

i have said this many times before, but here it goes. u said u just got your angel, well u will notice it has a lot of internal grease. This grease will cause inconsitancy problems. First you should totaly dismantal the marker and clean it, then re-lube it with love juice. this will totaly solve your problem. :bike:

[mpire123]

i have said this many times before, but here it goes. u said u just got your angel, well u will notice it has a lot of internal grease. This grease will cause inconsitancy problems. First you should totaly dismantal the marker and clean it, then re-lube it with love juice. this will totaly solve your problem. :bike:

I would advise against totally dismantling a brand new marker. My advice is to run about 1000 shots dry-firing to help distribute the grease and oils.

[p8ntbllr2001]

yeh, ok, but u should still get all the greese out of the lpr area