Low Pressure

[SpeedKillz]

Just a couple questions about low pressure:
How do you set it?
What does it do?
And does it have to be done?
Those are prolly some noob questions, but i wasnt to sure so i thought id ask. if you know LMK
Thx

[firemedic30]

If you are talking how to set the gun up to get low pressure.

1. Get the largest volumizer
2. Set the LPR to 55
3. Dwell to 17

Perferably you you would to see a LP bottle, ie-350-450 psi into the gun.

It will give you a gun with less kick and better efficency!

No it does not have to be done!!

Everything that I mention is totally up to you!!

[PlazmaSpeed]

Just a couple questions about low pressure:
How do you set it?
What does it do?
And does it have to be done?
Those are prolly some noob questions, but i wasnt to sure so i thought id ask. if you know LMK
Thx


Take the LPR cap off, there's a tool that comes with the ANgel tool kit or you can use circlips and turn the LPR adjuster right or left, it tells you how turning right or left affects the LPR in the manual.

The LPR adjusts the OP of your gun I believe, the lower the pressure the easier it is on brittle paint, there's also a few finer points that I can't remember.

No, not necessarily the Speed is ready to go out of the box. Tweaking the LPR is for when you want to set your gun a certain way, either easier on brittle paint and use of more gas, or tougher on brittle paint and use of less gas.

[krispy]

What is a LPR adjuster? To adjust the LPR you have to take out or add shims and then check it with the gauge.

[firemedic30]

I got to add, what are you talking about PLAZMA???? I've never heard of an LPR adjuster????

[PlazmaSpeed]

I got to add, what are you talking about PLAZMA???? I've never heard of an LPR adjuster????


lol I got :owned: I confused the LPR with the part in the ram.


:owned::owned::owned:

[pgaglio]

Just as an aside, when you are removing shims, be careful about taking out more than you think. The things have a strange way of sticking together. It may seem like you've only pulled out one or two, then you realize it's actually several more stuck together.