searched, but could not find...

[wadd]

I tried using the search, but it didn't help me. how do you change the firing mode on a zip chip? I've taken both sides of the grip off, and I don't see any adjstment for a firing mode. All I see is ROF anddwell on the left side. It's obviously not dwell, and "Rate of fire" shouldn't change the firing mode. So, how do you change a zip chip to get it to fire full auto, or in one of the bursts? Thanks,
Jeremy

[Dyelcdangel]

Here we go:
When you take the grip pannel off of the frame, you will see 2) 2 position slide switches. Forgive me, but I can't exactly remember what the exact positions area, but I think they are as follows:

Semi: both switches down
Full Auto: left switch down, right switch up
3 shot: Left switch up, right switch down
8 shot: both switches up.

I will check at the local store tonight and make sure what the exact sequence.

[wadd]

Thanks! 2 down is semi, 2 up is full.
Jeremy

[wadd]

humm, I searched for "zip chip", and "zip chip modes" and neither one gave me any useful information

[killerbombo]

Dip switch positions

when in, O&N -semi,1&2-full auto,1&N-8 shot zip,2&O-3 shot burst.
ROF is adjustable in semi,full auto, and 3 shot burst modes.
ROF fixed at 8.75 bps in 8 shot zip mode.
Turning rof adjustment pot clockwise increases rof.
***All info supplied is straight from the card that came with my board...Can't seem to throw anything away.
Regards, Mark