LPR for LED??

[speedball43]

i was wondeirng if its possible to put a LPR kit on a 99 angel LED? if they even make them for angels or just get one for a different gun and do some remodeling to my angel. im just a curious paintball player.

[RonnyMcDYO]

Are you talking aboot putting in some other companies lpr?

[mamba_juice]

are you looking for an internal lpr designed specifically for the led, or an external lpr?

[speedball43]

ineternal or exterior. but mainly i was wondering if you can put an exterior lpr kit like ones that goes on impsy and matrixes. those type. if not those, then internal ones and how much pressure it brings the gun down to.

[speedball43]

or if you can put any other lpr kit and just have my led modified so it can fit it

[Emmit]

the marker already has an LPR.

Free Flow made a mod that uses a Rock or similar type regulator to replace the Angel's LPR, but it voids any work that a WDP would do, and you not only lose the ability to tell what your pressure is running at you may also experience a nightmare headache trying to get it to work.

[RonnyMcDYO]

As well the operating pressure is more governed by the internals of the gun, ie the noid and ram. It needs the 80 to 90 psi to operate, anything lower and you wont get a full cycle. The Free Flow mod will allow you to throw a jackhammer or ans reg on the front end of the gun, but like emmit said you cant tell what your LPR pressure is at unless you can get your hands on a tool that will test it, and im pretty sure Free Flow is the only one that has one and not sure if they sell them. And I dont know if you have noticed but there are very few after markey angel parts, and there is a good reason for that, WDP makes good stuff, no need to replace it.

[mamba_juice]

actually you can check the lpr pressure on an external one if you use a hoseless lpr from fear factory, i have one on my angel and i couldnt be happier...the operating pressure is at 250 and bolt closing pressure is at 25

[speedball43]

could anyone give me a hint of what good lp internals are and if they will fit a LED?

or


will an external lpr fit a LED, are they easy to install, and what is a good one that i can get for a fair price and if its compatible with a LED?



if you guys are wondering why im curious like this, i want to pimp out my LED with good and unusually upgrades to make it kick @$$. any help will be appreciated. one quick Q, can the chaos board have a lcd screen and will it fit a LED with ease?

[RonnyMcDYO]

To answer most of that its no. To get that LCD board on your led board you would have to design and build the interface yourself, and im sure you have no idea how to do that. As for the LP internals, you would have to replace the noid and ram with something that will allow for lp operation. The LPR needs to be at 80 or 90 because the noid and ram need that much pressure to work. All that these other LPR's do is give you a better flow rate, more consistency, not lower operating pressure.

[sickpups]

I have tried the free flow mod with Rock reg on my LED and you can check the pressure with a gauge. The only problem I've experience with it was FSDO, other than that it works great.

[mamba_juice]

i dont have any fsdo, i use a jackhammer. maybe its because of the rock

[RonnyMcDYO]

Ive heard that the free flow mod can be tricky to get set up right and takes a lot of tinkering with, but once you get it set right ive been told you will never spike or drop.