leaking by the top of the minireg .. plz help

[NyCzToM22]

by the top of the minireg theres a small gap rectangular size.. only like small enough for a nail to touch.. but i hear air comming out of that hole when i dry fire and screw in the n2.. i run a 68/4500 hp tank on it.. i was wondering if it was just a part of the gun i had to break in.. or there is actually a problem with my a4.. thanks for any responses!!

[dirthead]

I had the same problem with mine. I finally had to take the LPR piston out, move the shims around a little, lube the O ring on the piston, and put it all back together.....a couple of times....to get the leak to stop. When I went to a volumizer and lower LPR pressure, that's when the leak started on mine.

[gsxlimitd]

I am still having this same problem. Ive lubed, and replaced the o ring on the LPR piston...i have taken it apart and put it back together several times now, but im still leaking air out of that little rectangular hole on the left side of the minireg. Any more suggestions?????? please help

[Jouster]

I am still having this same problem. Ive lubed, and replaced the o ring on the LPR piston...i have taken it apart and put it back together several times now, but im still leaking air out of that little rectangular hole on the left side of the minireg. Any more suggestions?????? please help
*clutching at straws* Have you done an oil service lately?

Jouster

[gsxlimitd]

the gun is brand new

[thog94]

the gun is brand new


If the gun is brand new and you still can't fix it, take it back. It should be covered under the warrenty.

[Hep]

Could also be the o-rings on the lpr body.

[Sabyan]

i have the same problem. My gun is brand new. Any idea?

[mpire123]

I had this same problem. I replaced the LPR brass piston o-ring and lubed it up real good. Problem solved, for me at least.

[big fat guy]

like when my pressure gets really reall low it will like vent out of that hole but thats it...i dunno about you guys