Angel 4 Trigger: Please help

[mr.baro]

i got some paint in the little crevice between my trigger and the frame. it's an area that i'll have to remove to trigger to clean. I've read the manual, but i still don't know how to do it. Can someone please help me? I must clean my Betsy. haha

[Sanchez_TeS]

Posting for Vantage, he is banned for posting too much:

"Take the grip frame off (two screws), the trigger pivots on a pin. Tap this pin out with a allen key or whatever (to the left looking from the back). The trigger will then just come out the top of the grip frame. To put it back in just line up the holes and push the pin back in."

[dark2k2LCD]

once you have the trigger out, a Q-tip works great for cleaning out the paint, but vantage pretty much covered it all....yep..no more to be said

[Emmit]

cans of compressed air like you'd use for cleaning a PC or a keyboard etc work awesome!!!

[Sparco]

Actually Vantage missed one vital and utterly necessary point:

Remove the trigger pin grub screw with a 1.5 metric wrench. You won't be punching any pin out with that grub screw in there. Make sure to take care in tightening it back down after you're done, as that screw ensure the pin stays in the guide. Also the rear grip frame screw is significantly shorter than the front one, FYI.

[DeDSoL]

yea, i just got my slayer trigger today; well i cant get the pin to come out.... ive ofcourse taken the screw out, but when im tryin to get the pin out i cant... takin an allen poked, hammered the allen, pushed the allen and it wont suffice. Please any idea on why my buddy is being a bia...
somethin that would help would be tellin me how to remove that darn pin! :wowzer:

[DeDSoL]

never mind.... i just relized that i was tappin the wrong way! :stupid: :wall: