New Air has some problems

[BlueC&CIR3]

Well the problem is my lcd only works about half of the time. Sometimes when i push the button it just pops up for a 1/2 a sec and then fades away.

When the lcd does work it doesn't give an accurate readout. For example: we put new batteries in it when the tank was completely drained, and then filled it up. It says my output is at 400 psi and that my tank psi is only 1500. If i turn my output up to 600 it starts to leak from the safety vent. I get no shootdown and it works great over the chrono at 400 psi. I think the lcd is just not giving the right readout.

Does anybody have any ideas about whats going on?

[customIR3...]

for the 1/2 second trigger problem.
you board is loose. push it to the left and tighten the screws

[AdrenalinMan]

hey mine leaks over 600 psi too! i also need some answers

[AdrenalinMan]

oh and my pressure is spiking or something, the output will say like 400 and when i shoot it, it goes down, as soon as i stop shooting its back up to 400. any answers? rebuild kit?

[BlueC&CIR3]

ok, thx everybody, what about the tank psi readout problem? anybody have any reasons for why its doing that?