Changing lpr settings

[absoluteHavoc]

Im wondering..if you add/subtract the shims from the lpr side is there a way you could semi-accurately tell what the lpr would be w/o a tool kit. Im hopefully orderin one soon but untill then id like to know. Thanks.

[Emmit]

the manual gives you an estimate of what the shims do, but there's no way to be true on that estimate either as verious members (myself included) have seen some shims add as little as ~3psi while others have added as much as ~10psi. The LPR gauge is the only real way to check it out.

[absoluteHavoc]

o ok thanks for reply i wouldnt wanna try anything any way untill i get the too kit

[koziol]

My config :
SPEED
45/4500 Crossfire LP tank
evo w/z-board
ultralite
Angel Force Volumizer (http://www.angelforce.tv/volumizers.html)
dwell 14

I've gave my marker to local angel-tech for look over and ask how many shims do I have at my LPR - he said that as he remember 1 shim. He also said to raise my dwell to 16.

Becouse I don't have my own toolkit (have too buy one but always I forget about it). How to set up my minireg and dwell while I don't know exactly how many shims do I have ? :)

[Emmit]

again...number of shims is meaningless. Don't worry about how mnay shims you've got, worry about what the LPR is set to. If he says to turn your dwell to 16 then do it.

[koziol]

But when shooting on dwell 14 it's all fine. Any FSDO problems noticed.
He said that with dwell 14 marker may not be able to charge with air.
But if all works fine on 14 do I have to change ? I've got 45/4500 preset and with dwell 16 it may consume more air ? Will it be much more air used up in dwell 16 then in 14?