Why???

[MadSpeed]

How do I avoid having no ball come out of the barrel when I pull the trigger at the beggining of a round. I find it quite annoying not to be able to hit easy targets in the first 5sec's because the gun is not reacting. Is this the notorious "FSDO" that can be fixed by charging? Only reason I ask that is because my Speed was charged all night (8hrs.) before play, which contradicts that cure. Or is it because I turn off my gun and air between rounds and dont re-calibrate.

Thx,

[Emmit]

it's possible that it's either the charge or the dwell...turn your dwell up and see what happens.

[MadSpeed]

ok...Will do

[ezrunner]

I would definately give Emmit's call a try. I would also check the minireg output, if the minireg is creaping then it could over charge and put excess pressure on the valve stem that is normalized by firing the first shot.

In english... shoot the gun, let it sit for 5 minutes, then shoot again, does the 2nd shot fire correctly? Then it may be the charge/dwell thing, other wise start looking at reg seats/orings.

-rob