Exaust Valve Leak

[DrakeV]

I just aired my Angel Speed up for the first time and i noticed a leak coming from the hole in the breeh leadind to the exaust valve. I open up the exaust valve and the o rings were fine. What can i do to stop this leak and why is it happening? Help! :fighter:

[Sparco]

Fire several shots through it. I had the same problem with my Speed when I first got it, apparently the exhaust valve stem has to seat in the guide.

Other possible problems are:

- Not enough air pressure going into the marker from the mini-reg.

[DrakeV]

I did exactly what you said by firing several shots through it and it did help a lot but i can still hear the small leak what else could it, the gun is brand knew! :moon:

[Emmit]

ocne you've ran about 1000 rounds through it to break it in you won't have any problems. I had the same issue with my 4 when I got it. You just have to seat the valve properly and get it broken in a little.

[aerotcus]

if your tank pressure is below the output pressure of the minireg you'll have this problem too. I noticed this too the other night while running my tank down dry firing. I could only hear it with the breach open though

[BluesMetal]

Maybe thats my problem with my Evil Valve kit. Im having the same problem with it leaking through the exhaust port. My tank pressure is @ about 900 right now though so that might have something to do with it. What do you guys think?