New gun Ir3

[Welton]

I use to play with Autococker, I change the numbers and I got the best in speed and accuracy.This week I got a Angel Ir3.Is not fast like my orr-cle and people say is better. I tried to adjust the sets and is breaking balls on the barrel, choping, doing all kind of bad things. I shutt fast, so, my question is: Am I with the wrong kind of Paintball gun? :blasting:

[MoogLe]

was it chopping before you changed the settings?

[Welton]

Before I change the setings was not choping, was breaking balls on the barrel (brand new pipe set), I change the barrel from .693 to .695. This reduced a lot but not at all the breaking, at this time I start change the setings to get speed, I found the gun slow in ROF, then starting all kind of problems. :pissed:

[Emmit]

I've seen you say "changed the numbers" a couple of times...what do you mean by "change the numbers" are you refering to settings?

Each marker should be tuned and set up to reflect it's useage. Depending upon your LPR setting you will need a certain Dwell setting. Additionally all COPS settings are different on every marker. Some people have had their SENS at 4 and some at 12...it's really dependant upon your marker, and you should read the manual and set it up properly. If you're not familiar with the Angel marker, as your posts imply, I would suggest having a Master Tech look it over and take care of any problems you might having. A properly tuned Angel will always be able to shoot fast, and will be accurate at the same time.

[MoogLe]

well then u should restore the default settings

balls breaking in the barrel is the result of a bad paint/barrel match or crappy paint

try some different paint

[crazy8990]

its probably soemwhere else in the fourms but about how much does it cost to get a gun fully tuned?

[thog94]

Looking for tune up and other prices, just look here: www.wdpservice.com