Using it at 460 Output Pressure

[ReyRex]

Thanks jdmjohn

I have used it so far on my Angel and it seems to work great. I set the Output pressure at 460 though, is that bad? It seems to be working great.

I did put alot of practice shots, no paint though it just air at 150 output pressure to help break-in the gun and the AIR.

E

[karrkrash01]

Running ur air at 460 you should be fine using it with a min reg. i have seen output pressues at low as 325 with no problems

[djmjohan]

Originally posted by ReyRex
Thanks jdmjohn

I have used it so far on my Angel and it seems to work great. I set the Output pressure at 460 though, is that bad? It seems to be working great.

I did put alot of practice shots, no paint though it just air at 150 output pressure to help break-in the gun and the AIR.

E

If your mini-reg is gutted, or you have a gasthru, then 460 is fine although I would chrony it to be sure. Mine used to only need 380psi, although I was using a DEZ bolt as well.

If you have an intact mini-reg, then 460psi is a touch low. 650psi is better to ensure fast recharge.

Since you haven't put paint through your gun, you wouldn't notice the effects of slow recharge...basically a lot of dropoff when you rapid fire.

Enjoy your gun and shoot lots of paint.