I'm gonna puke.

[TeTra PuNk0120]

Ok I'm screwed, well I wish it would screw in.

I stripped the place in the gun where the feedneck goes in, and yes it's stripped, no it wont go in, I'm not a moron i know what stripped is and this is stripped.

Can I bring It 2 a gunsmith and have it retapped?

Or do I have 2 hand my freind my impulse because i cant afford a new body so im sol. and yes im an impulse nazi.

This really sucks, first my angel breaks so i trade it for an imp at the local shop, then i have my imp for 6 months and it breaks the week before the big game at waynes world, then i borrow my buddies dark and i break it trying 2 get the halo into the feedneck, after sanding it for about half an hour, trying, resanding, then trying, then resanding, etc....

[thog94]

It's time to start playing pump, you can't hurt the gun putting in 10 round tubes.

[TeTra PuNk0120]

Well i had my angel working perfectly for at least a year before the board fried, and the imp about 6 months before that board fried. I cant play pump, im dreading playing with my automag this weekend i cant survive with out 14 bps (pathetic how ive replaced single shot accuracy with accuracy through volume).

Not 2 mention i have a bad habbit of diving into the snake gun first.

[KEN CRANE]

I HAVE THE TAP AS WELL AS MANY OF THE WDP TECHS TO REPAIR THE THREADS.AS LONG AS THE THREADS ARE NOT TOTALY RUINED WE CAN REPAIR THEM AND EPOXY IT IN FOR A BETTER HOLD.

[Vague312]

The same thisg happened to my friends gun. Threads came right out puting his rev on his Speed feed neck.

I put some JB Weld on it, Centered it, And then put it in a place to dry without being desturbed for a day. works fine:)

But, the only way to get the neck off is to cut the gun in half for the most part.

But Hey' he dosnt want to keep tightning it back on to begine with? it kinda makes cleaning kinda harder i guess.?.?.?.

[Crazy4Paintball1]

I know that TAG's has an adapter piece he puts in. This way you can screw your feedneck onto this adapter, so you can change the feed neck around if you want. Or you can just glue that baby back in...

[evilempire]

Yeah thats what I did with my silver LCD, I should be getting it back from TAG's any day now.

[CAP_SpunOut]

I loaned a guy my Lcd, and the first game he slams into the 40 gun first. I was playing back and saw him walk off after about 15 seconds. I thought crap he got shot off the break. After the game he hands me back my Lcd in two pieces, hopper/feed neck and mainbody. He was freakin out cuz I had just gotten it. Well a new CCM clamper and titanium epoxy fixed that problem. The threads were blown off the left side of the marker, like nothing but raw metal left and the right side was bent all up. I cleaned it the best I could, put epoxy on the feed neck, and jammed it down the hole as tight as I could. Make sure no epoxy gets into the breech and make sure you like the feed neck, cuz it's not comming back out.

P.S. Your not the only one that felt like puking:)

[boathouse]

JB Weld

[Vague312]

JB Weld is God!!!!! U can use it to make everything all better again. :) :) :)