PDA

View Full Version : Stock Barrel


areyoui
11-30-2003, 09:15 PM
Question about stock A4 stock Barrel, I had paint braking only in in the front (6 in to the front/were the holes are), no paint in the breech or front part of gun...?

Should I get a barrel kit, how are the evils barrel kits (sized)?

taylor
11-30-2003, 09:20 PM
Ok try this if use diffrent paint and try it because possibley the barrel size doesnt match your paint if this is the case then buy a barrel kit my suggestions on barrel kit is my personal favorite the pipe (self cleaning barrel) mainly because it is much stronger and more durabile systtem than the freak..........the problem with it is that it doesnt match the a4 colours unless u anno it which is a pain these are just my thoughts

taylor

angel tech

kevine
12-03-2003, 03:42 PM
Sounds like a paint to barrel match problem. Try fresh paint and make sure the barrel is clean. If that still doesn't fix the problem, try a smaller paintball. These are just suggestions to try first before spending the money on a new barrel.