Broken DYE angel

[pbrenegade]

I recently bought a 2001 red Dye Ironmenn angel lcd. It had a leak from behind the noid when I aired it up. So then i brought it to Paintball Wizard to have them take a look at it . They replaced the noid to see if thats what it was and replaced the manifold and screws. Nothing would work. The previous owner said it might be too many spacers in the LPR . I was wondering if this was something i could fix myself. Also if it is then if anyone had any suggestiuons or diagrams it would be greatly appreciated.


Thanks
-Jordan

[Emmit]

if the LPR is being overpressurized then yes you'll see this type of issue. You'll need to test your LPR to determine if that is the case, if so you'll likely need a new LPR as you may either have a bad one, or have damaged it by overpressurizing it.

[warpedx]

check the orings on the ram too. Be cheaper to replace than an lpr.

[crashdan]

an overpressureized lpr would cause teh seals in teh noid to leak, if the pressure then gets too high itll cause the noid to rupture

[evilempire]

Is it a small leak, it may be the exaust valve.

[RaistlinsLegacy]

i dont think it is if it is behind the solenoid billy, if it was an exhaust valve it would come from the breach and barrel...i would go with emmit on this and try to see if it is the LPR