first time angel owner need help setting up new gun

[cody69]

hey...first off i read emmits review..it was very good *props....but ya....dident understand all fo it

anyways after a long wait i just got my black gloss a4....it is awsome

anyways i got a angel air tank also

could someone plz explain how i should set up my gun....like pressre dwell and mode (i dot want to shop paint and i can shoot about 15bps..so what setting would be bes) and stuff
also where can i get screws t mount my anel air tank and how much will the 2 be

any other ttips would be great

thanx

[dynastySSS]

well as far as settings just go to this http://www.angel-owners.com/forums/showthread.php?s=&threadid=15119 and use those setting. and i hope u know how to put ur tank on or im gonna slap u

[Emmit]

the screws for mounting the tank should've been with the tank.

Either leave the initial settings as they are and make sure you turn on Sensi and calibrate it etc.

You can read the settings thread, or try Ken's settings if you know how to change LPR etc.

[Wadesimmons]

i am his friend...he lost the srews...where could he get new ones..i think he has the name and modle or something..but would a hardware store carry them? or a paintball shop?

also...where is the serial number..he has the id number under the menu....but where would he find the seiral number on the gun?

[speeddemon2003]

i dunno nething about angels, which is funny, cuz im about to jump into and A4/a.i.r. setup, come january, i think i wil take a tech class.


steve

[speeddemon2003]

either air, or maxflo, which do u think?

steve

[VASHtheSTAMPEDE]

Conquest, and I don't think just anyone is offered a tech class.

[mpire123]

The serial number is on the breech block as well as on the bottom of the frame (only visible with space grip off). It is also on the box.

As for mounting screws, on page 23 in the important box, it says the screws are 10/32. I got mine at Home Depot. Make sure you don't get too long of a screw though. The manual says that the screws should not exceed 10mm into the bottom of the frame.

I guess reading the manual pays off.

[cody69]

yea i read the manual 3 times first day and agian today..i knew which ones i needed ..i was just wondering where i could get them....thanx alot though...i will go check out home depot on like sunday or something

also to set up my gun....do i need air? like to set all the settings and stuff?

[mpire123]

Originally posted by cody69
yea i read the manual 3 times first day and agian today..i knew which ones i needed ..i was just wondering where i could get them....thanx alot though...i will go check out home depot on like sunday or something

also to set up my gun....do i need air? like to set all the settings and stuff?

Yes, you need to run air and paint through it. Otherwise you won't know which settings will work best for you. If you want to adjust the LPR then you will definitely need air.

And the screws I got were no more than $1 for a pack of four with nuts (which I don't use).

[cody69]

k thanx alot for all the help

i am goin to try and do all that stuff and if i run into a problem i will probally ask for help agian..lol

thanx everyone

[speeddemon2003]

hello, asked a question...
lol


steve

[Wadesimmons]

what the hepp som1 got into my account i did not say that>\

w/e i am his friend lol

[cody69]

richard its was me dumbass when i was over at ur house...lol i typed that post like right infront of u...lol

[Wadesimmons]

no i was nt when was that?

w/e

dont call me dumb ass dumb ass!