PDA

View Full Version : Oil Service

Sid2.0
11-28-2003, 12:51 PM
I just got done playing with my a4 and it said oil sevrice recomended but where do i put the oil??
Jethro
11-28-2003, 01:14 PM
2-3 drops in the bottom of the regulator is all you really need.

-Walter
Sid2.0
11-28-2003, 01:15 PM
In the micro line?
Jethro
11-28-2003, 02:43 PM
In the line or in the fitting...once you gas it up it goes through the gun the same.

-Walter
Sid2.0
11-28-2003, 02:45 PM
Thank you for your help.. So thats it no where else...
kylelynch
11-28-2003, 05:27 PM
right, fire it like 10-20 times, wipe the bolt, and your good :D
Emmit
11-28-2003, 07:48 PM
in actuality you might want to wait until the next oil service. You really only need to do it about every 8-10k shots. However since WDP notoriously packages their markers with a large amount of grease you probably don't need to worry about it right now.
taylor
11-28-2003, 08:19 PM
if you feel like oiling the bottom of the regulator or in the fitting then go right ahead but emmits right u shud really wait to liek 8-10 k shots


taylor
KFCarp
11-28-2003, 08:49 PM
mine told me to grease it......what do i grease...iam asumming tha hammer/ram area???? or should i wait since it does come wit a TON of grease on it???
areyoui
11-28-2003, 11:29 PM
What type of grease should I use, what should get greased? thx
mpire123
11-29-2003, 12:32 AM
I use WDP Love Juice grease. You can also use Dow 33 (aka Shocker Lube).
VASHtheSTAMPEDE
11-29-2003, 03:08 PM
Shouldn't he also put a few drops in the exhaust port?
Emmit
11-29-2003, 07:00 PM
yes
taylor
11-30-2003, 12:25 AM
Originally posted by areyoui
What type of grease should I use, what should get greased? thx


you should use the love juice grease you can get it anywere ...where they sell angels , you should grease the hammer/ram area only wen it says grease service needed
hope this answers you question

taylor:nerd:
-=Pandemonium=-
12-02-2003, 06:14 PM
are there 2 different love juice olis, like oil adn grease?
VASHtheSTAMPEDE
12-02-2003, 06:16 PM
Yes.
Emmit
12-02-2003, 06:24 PM
there's an oil and 2 greases

1 grease is for the marker the other grease is meant for the AIR.
Sun Tzu
12-02-2003, 10:13 PM
I never saw anywhere in the manual that says, the gun tells me it needs grease or lube. Am I missing something? (what page?)
Emmit
12-02-2003, 10:25 PM
it's not in the manual, when you've reached a certain number of shots on the counter the marker will give you a maintenance message telling you to oil it or grease it.
Sun Tzu
12-02-2003, 10:31 PM
Emmit, when I turn my marker on it says LP V2 for a short time. Is this a message of some kind?
Emmit
12-02-2003, 10:41 PM
nope...that's the software version, just like the MEM version on the IR3.

all 4's in circulation are V2, no worries.
mpire123
12-03-2003, 05:24 AM
Originally posted by Emmit
nope...that's the software version, just like the MEM version on the IR3.

all 4's in circulation are V2, no worries.

If there were to be a V3, how would we go about updating the board? I bought mine from a Master Tech, if that helps. Would we be able to just send it in? I'm not too sure that is covered under warranty but if it's new, I gotta have it!