measuring trigger pull

[BuNkErEd]

i have seen people say their trigger pull is like 2mm or other lengths..i just adjusted my trigger and would like to know how to measure how long the pull is.

another thing, i was reading how u have to calibrate the sensi or it wont shoot fast. well im on sensi 2 and with air and no paint in, i can hit the orange zone...is there something wrong here? i did the little sensi test and it works.

[Luzrd]

put your marker down on a ruler and measure the distance between when the trigger is engaged and disengaged
did you search the forums? to calibrate the sensi just fire 6 shots slowly(i think its 6)

[Emmit]

Originally posted by Luzrd
to calibrate the sensi just fire 6 shots slowly(i think its 6)

5-10:wink:

I strongly recommend 10 at about 1BPS.

[BuNkErEd]

ok if i measured right my pulls 1 mm...does that sound like a good length? it feels good to me. and yes i tried a search and i found nothin. also i know how to calibrate the sensi, its just that should i be able to be in the orange zone with air in the gun and no paint or with no air or anything? cuz wouldnt it just shoot slow? im on sensi 2. my sensi isnt broken i hope.

[Luzrd]

im using sensi 2 also, and i get the same results
if there is no paint i can get into the orange, but not into the red, regardless of air being present (i hope thats normal lol)
not sure about the trigger length, i just use mine how i got it cuz it was pretty short and easily manageable, when i get my cobra trigger thats when im going to play with the settings

[BuNkErEd]

alrite then i guess its normal..cuz that same exact thing is what happens to me.

[F5monkey]

that is normal with the sensi on & no paint. the sensi is not seeing paint so it is slowing down the cycle rate. remember if the sensi is on you should have paint. if you are playing around with no paint turn the sensi off.

calibrating the sensi. = when you turn the speed on w/ paint , then turn loader on after the speed. now shoot 10 shots very slow like 1 bps. now you can go and rip.

[KreSSiouS]

With a speed, I know when you turn it off you have to recalibrate when you turn it back on. Do you guys leave your speeds on all day, or just calibrate it b4 every game?

[DogSniffMe]

my trigger pull is the width of a penny. groovy, now if i could only get it to bounce...haha...

[PBJeff]

Yeah I just got my speed and on sensi 3 I can get into the orange zone without paint, so it must not be a problem.

[Luzrd]

kressious just turn it off between games, unless theres only a couple minutes between them, and then just turn off air source (fire all the air out of the marker)
i think thats the best bet so you dont drain the battery