View Full Version : my force 4 and HPA
carter_hfx
11-20-2003, 08:00 PM
hey,
I get my Force 4 tommorrow and I have a question..
I currently own a Pure Energy 68/4500 HIGH output pressure (750psi??) tank, its not LOW pressure...
can this be used on my new angel???
thanks
Carter
Emmit
11-20-2003, 08:34 PM
you will need to make your air system LP. The Pure Energy regs can be changed, contact your local pro shop for help on this. You want about 350
carter_hfx
11-21-2003, 06:13 AM
hey, thanks for the reply
but would anyone here be able to instruct me on how to change my tanks output pressure??? I live in Nova Scotia Canada and there aren't exactly any "pros" working at our pro-shops....
thanks
Carter
Emmit
11-21-2003, 07:34 AM
contact PMI directly, they can help you out. We don't want to mislead you and cause more harm than good.
ufcd98
11-21-2003, 06:24 PM
Thank you emmit for the correct answer
From:
your friendly insurance and litigation agent
Rebelpuz
11-21-2003, 06:42 PM
y would u need to lower ur tank pressure as long as its going into an inline reg that should regulate the air down to what it needs to be correct?
aerotcus
12-11-2003, 08:30 PM
I assume since the angel 4/ force 4 is basically the same internally as the speed and uses the same reg, that it would be possible to make the 4 work with a HPA tank by rearranging the spring stack in the minireg. There is a thread on this in the speed forum. I could be wrong but its worth a look/.
djblotter
12-12-2003, 01:08 AM
carter
as you are in Canada I beleive Badlands one of the sites sponcers and they have a WDP Master tech their on site. www.badlands.tv is their webpage give them a call or email them I am sure they would be more than happy to help you out :hi:
carter_hfx
12-13-2003, 10:44 AM
hey,
I did call badlands first, that is where I bought the Force, however they told me I could use my HP output PE tank no problem, just screw it right into an asa, so I then called a Master Tech by the name of Robert Moon, and he said DO NOT air up my force with that tank, he said I need the LP conversion kit for the tank. so that is what I did
Carter
djblotter
12-14-2003, 02:38 AM
:slap: cool well dood in theory you can scrcrew your preset tnak onto the ASA but you will have a hellava time getting the velocity down, that' swhy the LP mod help the situation....
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.