How Do I Take Apart My Lcd

[terry]

I RECENTLY JUST GOT AN LCD AND IT WORKS FINE AND EVERYTHING BUT WHEN I WAS LOOKING AT BOLT I NOTICED BELOW THERE WERE PAINT CHIPS AND §§§§ IN THERE....HOW DO I GOT INSIDE..

[TopCourage]

first off....turn your caps lock off....its just annoying...:evilgrin: anyways....if u have paint chips down where the ram is....i have noticed that if there isnt a large quantity down in it....use a q-tip...i try to avoid taking out my ram just because if u mess with it.....then the setting of the ram is seriously f*ed up.....personally if it is a used Angel....i would send it to an Angel Tech to just give a complete clean out of it.....

[C.Carles-AOG]

Good call.
CAPS OFF.
As for cleaning, go to the Manuals section up top and download the manual, then you'll have a good understanding of the gun. I sometimes use a cotton swab (Q-Tip is a good brand) and maneuver it with a needle-nose plier.

[WarpedKid02]

When taking the gun a part, be very careful for the way things go, and how they are put back in. You will need a Angel Toolkit to take out your internal's.