PDA

View Full Version : speed settingts

Taz3:16
11-14-2003, 09:06 PM
can anyone tell me the best settings for speed w/54 cu pure energy tank (5000) and x-REVY
RaistlinsLegacy
11-14-2003, 09:48 PM
if the pure energy has a higher output preassure (850-900) i reccomend dwell 12, 6 shims, LPR 80, dye volumizer, and sensi 1....
KEN CRANE
11-15-2003, 10:26 PM
i would try rof 15(becuse of the revy being too slow)mode 2 dwell at 12 lpr at 70 you need a pressure gauge.the number of shims are different on all lprs.and a volumiser on the exaust valve side.
ezrunner
11-16-2003, 04:35 PM
Ken is the man :) See my other thread about this, but I am running 70psi on my lpr and 11 dwell and with my ROF at 12 when I run my revvy.

So his settings should deffinately work cause the higher dwell should make it easier on paint.

-rob
peejii
11-16-2003, 05:28 PM
ROF has no influence when sensi is on. But if it's acting up and you have to shut it down then it's nicer to have the ROF set to your hoppers' speed or else...
asianspeed
11-16-2003, 06:31 PM
Originally posted by ezrunner
Ken is the man :) See my other thread about this, but I am running 70psi on my lpr and 11 dwell and with my ROF at 12 when I run my revvy.

So his settings should deffinately work cause the higher dwell should make it easier on paint.

-rob

I have to agree with EZRunner. I have mine set to those stats when I use my X-board Rev ( uses less batteries than halo) and my angel still rips like you wouldnt beleive. Hope that helps.
ezrunner
11-16-2003, 07:03 PM
yeah I set the ROF to 11 or 12 so sensi makes it faster when it feeds faster. If not I want that time between shots is higher.

-rob
CLICK_666
11-19-2003, 12:21 AM
does the speed ever run over 300psi?
would it be okay to put a 300psi gauge on the asa??
ezrunner
11-25-2003, 01:09 AM
you can set your speed to where the valve pressure (output of the minireg) is not over 300, but the reg can be easily adjusted over this, I'd go for a 300psi guage if you want to read it, but just know that you may blow it if you up your reg too high.

Why use a gauge? You could get the asa & gauge from an a4

-rob
CLICK_666
11-25-2003, 01:10 AM
i live in canada and its harder ot get parts like that up here in our little igloos lol