PDA

View Full Version : bolt stick

tyronne
11-13-2003, 12:36 PM
Hi i've just developed a new problem where my bolt seems to stick sometimes after I fire a good string of paint my setup is as follows black speed ( almost new out the box )
max flo 88 first gen rig
Hornet
11-13-2003, 12:37 PM
open up breech make sure there is nothing on your bolt

clean and fire
tyronne
11-13-2003, 12:46 PM
thank's

I've given that a shot but, it still seem's to happen
BAD INTENTIONS
11-13-2003, 12:52 PM
what sensi mode are u in? cauz sometimes there is pauses in mode 3 and it might seem like its sticking!
MoogLe
11-13-2003, 12:52 PM
are you chopping?
tyronne
11-13-2003, 12:54 PM
I'm in sensi mode 1 and yes I'm chopping

ty
BAD INTENTIONS
11-13-2003, 01:02 PM
humm make sure you dont lube your bolt cauz that will mess up your sensi when is the last time u greased your speed?
tyronne
11-13-2003, 01:07 PM
the bolt is dry as the kalahari destert ( very dry )
BAD INTENTIONS
11-13-2003, 01:08 PM
when is the last time u greased it
tyronne
11-13-2003, 01:12 PM
just got the marker when should a gease it and how # ps ( I got it with no manual with it )
BAD INTENTIONS
11-13-2003, 01:19 PM
o i c u can get the manual online at http://www.theangelguy.com/html/downloads.htm

u should lube the speed every 8,000 shots or every month (if u use it alot)
tyronne
11-13-2003, 01:24 PM
thank's but is there any posiblity that I need to get a new bolt, if so will the A4 bolt work
BAD INTENTIONS
11-13-2003, 01:27 PM
actiouly this manual is the speed one! http://www.88psi.com/?rubrique=manuels&manuels=Speed#


yes the a4 bolt will work iam getting one for my speed in a lil bit! but i dont think its your bolt i never had the prob
tyronne
11-13-2003, 01:33 PM
as for the problem at hand i've been told A. grease it ????
B. not grease it
C. when did I grease it !!

Should I gease the bolt ??? or replase the bolt

ty
F5monkey
11-13-2003, 01:36 PM
do not grease the bolt
BAD INTENTIONS
11-13-2003, 01:36 PM
never grease the bolt it will gunk up your sensi rod you might want to try greasing your ram (u can c how to in the manual i gave u for the speed) it after u grease the ram the prob is still happining then try replaceing the bolt with a new one hope this helps!
tyronne
11-13-2003, 01:47 PM
ps thanks for the manual it's going to help a lot, how do know if my bolt is stuffed , as it stand's my bolt has small perferations on the gruve in the bolt !! any idea's
t
BAD INTENTIONS
11-13-2003, 06:27 PM
is it your stock bolt?
peejii
11-14-2003, 04:32 AM
Charge marker before every game, really. Use sensi 2 or 4 (I use 4), sensi 1 has been known to sometimes freeze for 1s! Grease the ram and put 2 drops of oil into the mini and shoot about 20-30 times to get the juices around the gun. After that wipe the bolt. The bolt will show some scratches that's normal.
Might be that your LPR pressure is low. If you can check that it's in the 75psi region.

p-j
tyronne
11-14-2003, 01:32 PM
HI

this mite seem funny but I've tryed this out ,within my first steam I Chop and then I seem to get a bolt stick, after that everything seem's fine for the rest of the day. Before you ask yes I've lubed the gun.

ty
Any ideas

ty
RaistlinsLegacy
11-14-2003, 06:44 PM
hmmm....try to lower your lpr i think that might do it....not sure though
danne h
11-15-2003, 06:17 AM
what hammer you got?
tyronne
11-15-2003, 06:41 AM
just the stock out of the box hammer
danne h
11-15-2003, 11:09 AM
brass or steel? yellow or silver
KEN CRANE
11-15-2003, 10:22 PM
set your gun up as follows. mode 2 rof 15 dwell 12 lpr 70 input from your max flo 400 .if it breaks paint there you may have a problem.if it doesnt its in your set up.those settings are safe.by the way what hopper are you using?
tyronne
11-17-2003, 07:59 AM
thanks Ken
I changed my setting's as advised , when though about 500 balls no problem's so far , I also found out the the Speed I bought secound hand was returned WDP , Is there any way that I can find out what work was done on it as It's former owner cant be reached

thanks

Tyronne