air leak out the asa

[krispy]

I have a small air leak coming out the top of the asa(top piece of the reg). I took it apart and checked the oring. It looked fine and I put some love grease on it, but it still leaks out the square hole?

Any suggestions?

[Emmit]

someone else recently had a link there and it turned out to be their LPR o-rings.

[krispy]

how many orings are there? Is the oring on the top piece that holds it all together one of them?

[baexmeyer]

I had the same problem...It turned out to be the oring on the LPR. I had Chris from Cobrapaintball look at it and he said that sometimes the machining process doesn't remove all of the fine particles around the LPR so the oring didn't sit right. Have a look at that and you should be good.

[krispy]

how do you get the lpr body out.

[Emmit]

either the LPR extraction tool...or apparently the site rail screws work too

[krispy]

What is the LPR extraction tool. Does it come with the tool kit. I can get the first peice out with the tool that looks like a little drill, but I can't figure out how to get the body out.

[baexmeyer]

That should be the only peice you need to take out. Just look at it to make sure there are no burr on the metal and then change the o-ring and that should solve it.

[Com]

i just used a small allen key to get my lpr out, or if u take the battery out then u can get a long object to push it through from the battery side