problem with angel air on my speed

[tankj2206]

i went to play today and i couldn't use my speed!! this is what happened: i filled my tank and set the output pressure to around 600 psi... i dryfired a couple times and then it started to leak... it leaked on the release valve on the AIR reg...i saww that my pressure was now 880 psi! i turned it down and shot a couple of times.. when i shot it the pressre went all the way down...i waited and the presure rose all the way up to 880 again, but the reg was backed all the way out! i shot again and the pressure droped all the way down and rose again....it pissed me off.

what could this be?? battery problem? AIR problem?

any help would be great....thanks

JJ

[Emmit]

sounds like you've got a cut o-ring on your rocket. You'll want to replace all 3.

[tankj2206]

how do i change those? they are on the AIR right.....

do i buy a repair kit or what?

thanks for the help Emmit

JJ

[Emmit]

you don't need the tool kit to replace those o-rings....but you will need the o-rings. If you don't have the spares our sponsors do.

[tankj2206]

what is the rocket? im kinda new..... lol
i just got mt angel Air

thanks

JJ

[Emmit]

open the manual and look you'll see....

when you take the bottom of the reg off, there is a brass piece that goes up into the body, pull it out and there are 3 o-rings on it. You want to replace those 3, as well as the one that's in the bottom that's recessed.