my reg keeps leaking

[drkangl_38]

ok heres the low down...

when i air my dark up, it slightly leaks where the mini reg is screwed into the part that hooks to the body. what is causing it?
thanks

[Emmit]

check your o-ring on the mini reg. that could be one issue

[drkangl_38]

i replaced it and everything

[dr.strangelove]

is it leaking from the reg or the manifold right above it?

[drkangl_38]

its the reg

[PBPlaya159]

if its the reg it has the be that o-ring at the top, because it stops all the air from leaving the asa.

[Jtek]

also check the oval Oring where the gun body meets the ASA. Also, make sure that screw holding the ASA is tight - if not, it can cause the oval O-ring to leak.

My friends angel LCD was doing this a few weeks ago.

Jtek

[drkangl_38]

its tight. i still cant figure out why its leaking

[C.Carles-AOG]

How much pressure are you running through the system?

[three fut nuthin]

Ya on my LED this is also occcuring....were the reg connects to the body...wat should i do?

[dj_alien]

anyone try some gold cup yet?

[mavman]

same thing is happening to me waht to you know, but i just got a brank new mini reg.

[MoogLe]

are you sure it's the minireg and not the manifold like already said? cuz the only thing that would make the reg itself leak is the o-ring...


has to be the manifold, check your manual if you dont know what that is