PDA

View Full Version : WAS Equalizer Board for Speeds

DogSniffMe
10-08-2003, 06:21 PM
did u guys hear about WAS coming out with an Equalizer Board for the speed? that sounds awesome. plus that'll have the WAS eye on it (i think), which is great. dynasty already has the WAS boards in their angels. this is gonna be sweet. here's the thread...http://www.pbnation.com/showthread.php?s=&threadid=316026 it's like on the second to last page.
acoenfam1
10-08-2003, 06:52 PM
Consider the source, as in PBN...
xen
10-08-2003, 06:57 PM
Jim Drew stated that he gave Dynasty boards, but that doesn't mean they will use them. We won't let Dynasty use something that we feel is inferior than the stock part.
Jose_Rico
10-08-2003, 07:07 PM
Bleh! I spoke with WAS in reference to an Equalizer for the LCD. It's amazing how fast gossip travels on the internet.

Have you guys considered that WAS boards don't use an opto switch? Didn't think so...
xen
10-08-2003, 07:22 PM
I'd rather use a microswitch.
I prefer it.
RaistlinsLegacy
10-08-2003, 07:57 PM
no WAS for speed, only for Lcd's i think...
xen
10-08-2003, 08:31 PM
Read that thread
Jedrith
10-09-2003, 09:39 AM
Yeah I sent WAS an email, they said it will be out in about a year/ year and a half....sucks balls.
Jose_Rico
10-09-2003, 01:27 PM
Originally posted by Jedrith
Yeah I sent WAS an email, they said it will be out in about a year/ year and a half....sucks balls.

For the LCD or speed?
RSgalvatron
10-09-2003, 01:41 PM
If WAS does decide to do the board. U will probably have to drill holes for the ACE system. i seriously doubt WAS will release a board using the existing SENSI.
Jose_Rico
10-09-2003, 01:47 PM
Hmm... I don't know. I would think that any electro board would view any ACE (sensi, etc) in the same way. I mean, all the sensor is doing is telling the board there is a closed connection right?
JT2002
10-09-2003, 03:07 PM
actually you are all wrong. ive been talking to was. Dynasty has enough timmy was boards and will be using them in all of their angels. this mod can be done to any speed.
what is it?

take a speed, get it milled to accept eyes.
throw away your sensi, throw away your led board.
throw a set of timmy eyes in the gun.
put in a microswitch,
and finally, pop a timmy was board in there. wire it all up, and PRESTO!!! youve got an angel speed on roids :smile:
Jose_Rico
10-09-2003, 03:10 PM
Good in theory... but considering the Angel's 14-way is much different than all the other guns... it's not going to work. Besides, if you want all that timmy sh*t in there, buy a timmy!
JT2002
10-09-2003, 03:19 PM
then tell me why are 2 of the dynasty players and very soon the whole team running this setup? blah blah blah. if you look at it, timmy and angel are very much alike. they both have similiar lpr's, except the angel lpr is incorporated into one of the tubes, rather than hanging outside the gun.
second they both use a ram and hammer to hit a poppet with a cup seal sort of piece. except that the angel ram is its own separate unit to the gun, and that teh timmy has air lines running from the noid to the ram, where the angel has the ram sitting right under the noid. both guns use a hammer connected to a bolt. the difference in each gun is the way each part is used, made to get teh job done, the angel simply stuffs it all into 3 tubes, the timmy, has things a little more separated apart.


btw, go to pbn and ask WAS about this, he will tell you that it works
DogSniffMe
10-09-2003, 05:13 PM
the WAS boards are the fasting things out there. if it comes with their eye, it'll be cheaper than buying ace, plus u get teh equalizer board. i want one :)
pgaglio
10-09-2003, 09:45 PM
given the amount of time it took WAS to make their board for the Impulse (which still isn't available for sale, I might add), I certainly wouldn't hold my breath waiting for an Angel board.
staticxpb88
10-09-2003, 10:25 PM
i migth actually try this, i told my friend about this and he wants me to do it to his speed, he just wants me to bypass the eyes so he can have it now without gettin it milled just yet.

Chris