Hmm lp or hp or both ?

[Roy]

OK . Im runnin my angel air on my speed . IM thinkin I want to run 200 output , can my tank as of right now do this or do I have to remove shims ?

[Emmit]

you really want to be closer to 400 or so, and in doing so you can confidently run the AIR that low.

[Roy]

Booo .. I wanted my speed to be lp I ran my Ir3 at 500 .
Emmit why would I want to be at 400 better preformance ?
Oh yea I got the tech series voulumizer ( aint that suposed to make it run at 200 or so ) . anyway thanks for the reply .

[Emmit]

the manual recommends 400psi inlet pressure to the minireg, you're still going to be operating the marker at pressures in the 200psi range. My 4 is running right around 200 with no volumizers on with 350psi inlet to the minireg.

[Roy]

oh ic so its the same thing ? For example if I had a gutted minired . Then i could run 200 ?

[trucker25]

yeah......if you had a gutted reg or a gas thru grip. If you use the mini reg you alwys want to turn the tank pressure up a little higher than your gun operating pressure

[Eyecare]

Try not to confuse LP with improved performance. These aren't necessarily related.