Speed trigger pull

[TheDemonSlayer]

i just got my hands on a speed, i love everything except that it seems like i can't lighten the trigger pull, no springs to change, no screws to turn, just a plate of metal that's too stiff for my liking.

[acoenfam1]

There really isn't anyway to lighten the pull. If the leaf spring is to light for you wow. I thought it way way to light but to each his own. You might try CAREFULLY bending the leaf spring but remember if it breaks you now need a new board.

[Bena]

God,
How sensitive do you like it?

[p8ntballdude]

honestly, i bent mine a bit so it would be heavier. i was gettin shots when i would be withcing hands shooting, it would like brush my jersey n shoot.

[dark2k2LCD]

Originally posted by TheDemonSlayer
no springs to change, no screws to turn, just a plate of metal that's too stiff for my liking. uh...actually there are "more screws to turn" than on the LCD. the speed has the same trigger screws plus the TOE

[TheDemonSlayer]

i wasn't comparing it to the lcd

all i am saying is that i'm unhappy that you can't adjust that strength of the pull, for over $1000 i would like that option.

Maybe mine is sticky or something, i'll clean it out and see if that helps.

[acoenfam1]

Check to see if the tape or whatever it is WDP uses to hold down the sensi wire is interfearing with the trigger movement at all. I had to cut a little bit off of mine at first.

[dye man]

bend the plate in and back the top screws out and the middle trigger screw in all the way

[googly]

take off the trigger fram and bring the back trigger screw in and that will make your pull longer but lighter, also pull your trigger alot to give it that spongy feel