Uk Led Hop ups

[pupster01]

hi guys i thought if anyone can help me this would be the place to find them

I'm just purchasing a led with a max-flow what i want to know is :

A: is there anywhere in the uk or that services the uk that i can get a new frame blade or double trigger as the previous owner has cut away the trigger guard to fit a double trigger and im not sure its legal for tornaments.

B: what frames do you guys surgest or for that matter should i avoide.

c: where can i get a set of service instructions so i can have a look inside :nerd: as the ramp although not scored is lying in a lot of paint which needs a good cleaning out.

D: last one what lcd bits are worth fitting and why?


thanks again

and i hope to hear from someone soon !!!!

[limitdliability]

well, since it has been a while since you posted and no one else has helped you out, i will try.
A: I cannot answer this because i dont live in the UK and i have no experience with any companies/businesses there.

B: As far as i know, the only company to produce an after market double trigger frame was AKALMP(www.akalmp.com). they no longer produce it so they are difficult to find and expensive if you happen to find them. i happen to have one for sale..but since ur in the UK it would prolly cost alot to ship it..

C:Well, you can email The AngelGuy (find his email at www.theangelguy.com) and if you explain what you need help with he will tell you what he suggests. I would also suggest looking at the LED manual that is at this site. That should help you out. But from what you wrote, it sounds like you may have remove your ram, which requires an Angel Toolkit if you want to do it with any ease. just my suggestion from what you wrote, i would ask tag first though.

D: Well, you can use feed necks, detents, triggers, volumizers, lpr and the exhaust valve from LCDs. You cannot use the grip frame, bolt, battery or the board from an LCD. there might be a few things im forgetting..but i think i hit the major ones.

i hope that helps...if you still have questions shoot them my way, ill try my hardest to help you out!!!

[Crazy4Paintball1]

Just as limitdliability said, Double Trigger Frames are pretty rare. AKA did make one as well as another company which i forget the name of. Both of these companies no longer make them. The double trigger you have on the led is tourney legal as long as it has a trigger gaurd. If there is no trigger gaurd than it wont be legal. If you dont have one DYE makes a nice one it is the DYE Fang Trigger Gaurd, or you can just search for a single triggerframe. I still use the single trigger and I am absolutely attached to it, I love it. All personal preference. I agree with everything else that limitdiability said on the rest. Enjoy your angel!

[pupster01]

thanks guys

i have finally ended up ordering the trigger guard from dye in the us as no one in the uk stocks them so thats that point sorted.

the question on the cds bits that fit the led came about due to comments i have hurd that by replacing some of the internals with lcd bits you can increase the rate of fire and decrease the gas use unfornunatly no one seems to know or remember what you change and what the effects areany ideas??

[limitdliability]

the only thing that you can change that can have the largest impact on air efficency and usage, is replacing the led exhaust valve, exhaust stem, and lpr with the conterparts from an LCD. i did this and my LED is very efficent now. to my knowledge, there are no other LCD parts that you can add to effect the air usage of your LED. good luck