AAAAH LIL TECH Help PLZ!!

[TeTra PuNk0120]

My 2k1 cnc lcd is shooting REALLY ReALLY short.....and no im not a fool i did mess with the mini reg to try for more fps...my chrono speeds are 100-180 and i have tryed everything short of adding shims to up pressure........just bought the angel few months ago.......yes used......but i know nothing about them b/c most of my 5 years of play has been with my mag. lil help PLZ

[IanR]

set your dwell to 14
Check the LPR pressure (it should be 87 psi)
check the snap ring to make sure it is not too tight


it's most likely the dwell and/or the snap ring

BTW you'll need a toolkit or tech to do this...

[LordTauk]

Barrel bore too big/paint too small? Maybe?

Some people say the breech oring doesnt do anything, others say it does, check to make sure the oring in the exhaust hole in the breech is still there - just incase

thats all I can think of right now that wasnt mentioned

[Syentific]

I have played my last three tournaments without the breech oring and I didnt see even a velocity change. I think it should change if you really sit diwn and think about what it does. The fact of the matter was it didnt make any difference to my operation. Just a little user input.

[KEN CRANE]

email me and i will give you a hand mrfixit220@aol.com

[TeTra PuNk0120]

Thanks for the help....but i think ill send my gun to mo's b/c i dun wanna risk it