Removing the Trigger

[jhu2005]

Ok, I have done several searches both on this forum and on pbnation, and I have yet to find the exact answer. I want to remove my trigger. Now the manual says something like "Knock the pin out" or something? But I am wondering how do you get out the pin from the trigger?. Currently the trigger pin is in the back hole of the stock IR3 trigger. Do I just need an allen wrench to unscrew it or do I actually knock it out? The problem with unscrewing it is the nut seems to be stripped of the allen threads

[GAV WA]

unscrew the grub screw with the allen Key supplied with the ir3 then from the other side off the grip frame gently tap the the pin so it slides out. You have to remove the grip frame from the marker first to remove the trigger though and if removing the pin has you stumped this may hurt as this takes the removal of TWO screws.

[jhu2005]

which is the grub screw?

[GAV WA]

Dude, I'm a little worried after that last question. Why do you want to remove the trigger, you don't need to if you just want to adjust it, unless you want to move the pivot.
Anyway the grub screw is the little allen screw that holds the pin in through the frame from one side, through the trigger plate, then into the other side of the frame.

[jhu2005]

ok, I was just checking, the problem is that the grub screw is mostly stripped. And the reason I would like to know is so I can change the trigger, to a blade style trigger