New Owner Help!!!!

[xXhAppyAznXx]

alright i just got a new angel

it was working fine before i took it apart

so i took off the trigger frame to adjust the trigger, put it back on

now i turn it on....

theres nothing but a blank screen

so i click a few buttons

it would show "_ _ _ _ _ _"

turned it off

and clicked another button
it would show "_ _ _ _"

i have no idea what to do, it wont go into safety or fire mode

those are the only things i see after it says "888 888" than another 6 digits appear after that

help me.. i just blew off 600 bucks if i cant fix it

[Goryevilkitty]

sounds like your board is fried if it never says safe. only thing i can think of is that you might be holding a button or the trigger when you turn it on. if you are, don't press anything when you turn it on and see if that helps. the last thing is to try and give it a full charge

[Emmit]

lengthen your trigger pull...you might have it too short and you somehow locked out your board.

then again it could also be fried and you'll need a new board...in which case you'll need to send it to a tech to replace the board.

[xXhAppyAznXx]

it cant be fried... its showing the characters fine... i didnt leave it in the sun, i didnt even shoot it yet... =(

[xXhAppyAznXx]

Originally posted by Emmit
lengthen your trigger pull...you might have it too short and you somehow locked out your board.

then again it could also be fried and you'll need a new board...in which case you'll need to send it to a tech to replace the board. fixed it! THANKS!! woooooo

[Emmit]

like I said...it might be a PIN thing, if you're not getting anything other than the 888888 then it may very well be fried....something may have gotten shorted out when you put the grip frame back on, like a pinched wire or something...I'm just trying to give you 2 possibilities

[boathouse]

that happened to me last week when i changed triggers...i was scared poopless :)

[xXhAppyAznXx]

Originally posted by Emmit
like I said...it might be a PIN thing, if you're not getting anything other than the 888888 then it may very well be fried....something may have gotten shorted out when you put the grip frame back on, like a pinched wire or something...I'm just trying to give you 2 possibilities thanks for the info man. thank god it was just the trigger

[punkd]

i <3 emmit when he does things like that

[Emmit]

Originally posted by punkd
i <3 emmit when he does things like that
things like what?