Unknown screw

[CLICK_666]

hey
whats that small screw right below the barrel
and in between and above the volumizers for??

[MoogLe]

i've noticed it, dont know what it is..

[CLICK_666]

weird

[Xadin]

unscrew it and find out?

[CAZ]

it is a dummy hole that needed to be drilled to drill the air passages in the body.

[CLICK_666]

so like for the solenoid air passage?

[CAZ]

yeah , as far as i know

[CLICK_666]

so then couldnt it be used for an external lpr???

[mychemicalromance]

doesn't seem like there would be enough flow in that little hole for a an external lpr to have an effect

[dirtywyrm]

you could use an external LPR, but whats the point?
I mean you look at the Free Flow mod thing and it was over hyped from the start.

[MoogLe]

the hole is too small for any kind of lpr mod, unless you drill it and make it larger, but yea most lpr mods like the ff mod are really a hit or miss, and in most cases i've seen, it's a miss

[Evil Angel]

its probaby "extra parts..." =P -al bundy

[Jim@ImpactPaintball]

the lpr mod wasnt to lower the 14way pressure it was to make the air chamber larger...and you HAD to move the lpr outside of the gun in order to have an open air chamber where the lpr used to be

[warpedx]

That hole mearly accomodated the fitting for the hose from a 'cocker style lpr to go into the gun.

[MoogLe]

Originally posted by warpedx
That hole mearly accomodated the fitting for the hose from a 'cocker style lpr to go into the gun.


well if that's the case then why does it come with the hole from factory? wdp doesnt do that mod for you..

unless i misunderstood what you're saying

[warpedx]

The hole goes from the front of the gun to the back, but couldn't be drilled purely internally. The screw in the front seals off where the drill came in from the outside. Freeflow just replaced the plug with a fitting to accomodate their mod.

[Jim@ImpactPaintball]

what hes saying in fewer words.....the screw caps the end of an air passage inside the gun