speed chopping real bad

[Xadin]

ok heres the problem, when i start to rip on my speed every time it chops a ball and makes the bolt stick forward. my egg2 has new bataries and im not even shooting that fast so it should be able to keep up. its good paint and it fits my barrel. i cant think of what could be wrong, i have shot about 15 cases through it without problems and its just happend recently. i havent used sensi ever since i got the gun becuase the sensor broke on my second day and i havent gotten it replaced yet. I dont have the gated feed in and my battery has a full charge all the time, i charge before every day of play. i cant figure out whats going on.

[dark2k2LCD]

well, obviously you wont chop if you use sensi...you dont need to get it replaced, there is an extra rod in that mini ziploc bag of allen keeys and shims. Just take off the trigger frame and replace the rods

[Xadin]

thats not the part that broke. its the sensor itself, the little golish strip that the rod presses down on. but i found the problem, i use an egg 2 with a cut neck and i found that if i push the egg to far down in my feedneck it leaves a gap enough for the egg to feed a ball but there isnt enough room. It squshes down all the balls and makes one ball and a little of the second ball apear in the breach so when i shot "bam" i chop. i found that if after cutting off 1 ball length if i sit the loader so its about half way through the little holes in the stock feedneck i can rip like no tomorrow and not chop a single ball. i just went outside and tested my theory with a hopper full of paint that i shot as fast as a possibly could.

thanks for the help

[Razor]

Do what I did. Buy a NYX Matrix.

To bad noone wants to buy my Speed.

[P2K1]

Number 1 prophecised as much.

[angel4life88]

Will A speed o5 break paint if i use the egg2 on it? :ph34r:

PLEASE ANSWER

[Paintballjc]

Will A speed o5 break paint if i use the egg2 on it? :ph34r:

PLEASE ANSWER
no, it has eyes, it wont break paint if you have a gravity feed on it....