PDA

View Full Version : Shoot down problems


amileo2001
08-31-2003, 11:14 AM
Hey guys i got a a black angel speed that has stock input pressure settings and my dwell is at 6. Last time i checked i was shooting about 275 280 on the chrono. Anyways i got my trigger set really nice and i can rip on this gun. I notice as i hit the highest speeds my balls loose velocity and chop. I thought this might be shoot down and if im right how can fix it? Also i have fsdo too how can fix that?

p8ntballdude
08-31-2003, 11:53 AM
by 6 as ur dwell do u mean 6 bars?, cuz that would be 13 as ur dwell. explains it in the manual. what tank are u using? is it lp, hp, adjustable? if its adjustable just turn up the output pressure. as for ur fsdo, charge, charge, and charge again.

amileo2001
08-31-2003, 12:23 PM
Yeah 6 on the bar (13 then) im also running a high pressure tank. Also for dwell and sensi adjustment it says scroll till you get to dwell and then press the green button to adjust, well i press the green button and nothing happens but if i press it for mrof it works fine. am i not doing something?

peejii
08-31-2003, 01:02 PM
For adjusting dwell you need to open the grip and press the yellow button inside.
p-j

CLAY
08-31-2003, 07:13 PM
what loader are you using?

acoenfam1
08-31-2003, 10:46 PM
Originally posted by CLAY
what loader are you using?

What difference would that make to the drop off?? The chops maybe but it sounds as if he's got some major drop off/recharge problems with either his minireg, LPR, or his air system.

Jonny
09-02-2003, 01:59 AM
I once spent hours working on a speed trying to find out why it had fsdo, chopping, and inconsistancy.

At first I thought it was the regs, then a bad battory, the even a bad board.

Each time this guy came back with the same problems.

To make a long story short, it was his HALO. It was a pre-TE software and it was pushing so hard down on the balls it was putting the bottom part of the second ball 1/3 into the breech. It was slowing the bolt down, breaking the paint, ect. The second he put MY HALO on (TE-z code) the thing ripped.

Stupid hopper.

Anyways back to the problem at hand. Usually fsdo and high ROF drop off are caused buy low batts. Give your gun a good charge before you play.