HPA running on my IR3 Fly

[dynastyballa]

I have a preset tank 750 psi, i think, well anyways someone told me it was bad on the reg to run more than 400 psi into it. Is this true?

[s-fin]

It is not a problem to run it at 750 psi. The manual says that if you have an A.I.R. to run it about 600 psi. When it gets to your mini-reg, it takes it down to about 400 psi. And then when it gets to your LPR, it gets taken down 95-105 psi. So you should be just fine.

[warpedx]

&50 i actually the recommened input to the minireg. Many people run adjustables at 600-700psi.

[C]-[iLDe]

youre just fine with 750 into the minireg.

[PBall]

I will be getting a HPA regulated at 800 to 850psi I hope this would be no problem on a 2003 Dark IR3.

[warpedx]

Only the speed and 4 need to have a lower input. Everything else is just fine.

[Deep Sixx]

The Speed and 4 are just fine with an 850psi preset output tank.

sixx