mystery bolt

[chromeIr3PW]

i was working at my shop today and i found a bolt deep in the hundreds of drawers we have...its white has three holes in the front its delrin i think and it has an angled air port..i was dumb and put it in my ir3 to see if it would work..i drie fired it and it shot fine..but im not really sure if its for the ir3..i checked online and it looks like the shocktech supafly bolt but i thought i should check with you guys before i really use it

[Jedrith]

That is an accurate description of the Superfly.

[chromeIr3PW]

will it fit my ir3 or is it for the lcd

[Jedrith]

Ir3 and lcd bolts are the same size, but the IR3 bolts have a little cut out for the cops rod..they can be used in either though.

[chromeIr3PW]

ok thanks one more question though...do you think it will screw up the ball detent or the cops if it doesnt have the grooves cut out for it

[Hep]

only the COPS rod will it effect if it doesnt have the groove on the bottom. But if you dont use COPS and your COPS rod is broke off clean with the breech already then go ahead and use it.
Hep

[chromeIr3PW]

your screwing with right?lol my cops rod is still intact...so i will not use this bolt..seeing as i like cops and do use it

[Hep]

Not messing with you one bit but since you said you use COPS dont use the bolt you found.
Hep

[chromeIr3PW]

thank you very much for telling me this before i screwed up my cops

[dark2k2LCD]

i'll take the bolt off your hands if your arent using it:drools:

[chromeIr3PW]

ok name a price...besides free lol

[GAV WA]

if, as you say, you've already put it in your ir3 and dry fired it then your cops rod will already be damaged.

[Emmit]

Originally posted by GAV WA
if, as you say, you've already put it in your ir3 and dry fired it then your cops rod will already be damaged.

this is likely a correct assumption

without that groove in the bolt, you've likely cut the tip of your rod clean off. This will mean you will not get an accurate reading when your balls drop into the breech. I would suggest you check your COPS rod that is currently in the marker, and replace it if necessary.

[warpedx]

You can just put the cops groove into the bolt with a little bit of sanding. Hell, you can put grooves for the ball detents too, if ya feel like it.

[freeloader12345]

Dremel, Make the groove. i havent tried it but i think it would work

[dark2k2LCD]

personally i dont think i would do that. by the time your done, you've either missed a spot and will be damaging your cops again, or by the time your done, you've decreased efiecency to the point it wasnt worth the labor because the stock bolt it better

[chromeIr3PW]

the weird part is that my cops system is fine it passed the dropb test and works fin the tip is still intact...i think im just gonna put it back

[Foosheezee]

i would be careful, as it will mow down your cops rod further if it is for t he LCD

[chromeIr3PW]

yeah i sold it...i want the dye bolt does anyone know anything about this bolt...thanks