PDA

View Full Version : 2 new IR3s both are junk.

ShadowsOfTheFallen
10-19-2002, 07:14 PM
alright the first problem is with a standard IR3, it doesnt work at all. turn the gun on, plug in the charger and the screen comes on the fades out and goes blank. whats the deal??? and the second is a cut and carved. its choping paint at 10 bps. what needs to be done. i adjusted the snap ring and the lpr is at 90 psi. i can shoot 15bps with my lcd and and it only chops paint because the loaders battery is just about dead. but the IR3 isnt even getting over 10 bps and its chopping. well, thanks for any help that is givin to me.
WarpedKid02
10-19-2002, 07:51 PM
Do you have your COPS set right?
IanR
10-19-2002, 07:55 PM
The chopping :
1)Make sure your detent isn't too tight. (It should be hand tight)
2)Make sure there are no sharp edges on the bolt face
3) Is COPs set correctly ? (See manual) put a little DOW33 under cops rod
4) snap ring is set right ? LPR at 95 psi ?

maybe the paint is just really brittle ? let us know
5150
10-19-2002, 08:02 PM
Calm down good buddie, it is all in the settings.
ShadowsOfTheFallen
10-19-2002, 08:04 PM
yeah i set the snap ring and the lpr is at 90 psi. the cops is off but the problem with the chopping is that i can shoot 15 bps on my lcd and it only chops because the loader cant keep up. the IR3 chops but i know its not because of the loader.
djmjohan
10-19-2002, 08:21 PM
Originally posted by ShadowsOfTheFallen
yeah i set the snap ring and the lpr is at 90 psi. the cops is off but the problem with the chopping is that i can shoot 15 bps on my lcd and it only chops because the loader cant keep up. the IR3 chops but i know its not because of the loader.

Make sure the gated feed tabs are not too stiff. Flip them downward and give them a good bend.

When my IR3 was brand new, the gated feed was a little stiff. Enough to slightly slow down the flow of paint, occasionally stopping it until I jiggled the gun a little.

Although your hopper is probably feeding fine, the tabs result in the feed rate dropping a bit, slow enough to cause a bit of chopping, since you're now feeding at 9 or 10 bps only.

I rolled up some paper and left it in the feed tube overnight. Now that the tabs are very bendy (only downwards though, no need to bend upwards) the feeding problem is gone.
ShadowsOfTheFallen
10-19-2002, 08:29 PM
the tabs are out right now, the cops some how got broken. and then after that i dont know. but hey atleast this one works, the other one wont eve charge or work.
ShadowsOfTheFallen
10-21-2002, 03:47 PM
o yeah, i forgot that impact is in Jersey. I tell my friend to send them there. National wont work on them, thats where got them from (they are who we buy wholesale from so they wont fix them)
Frostbyte
10-21-2002, 11:32 PM
cops may have gotten broken by using an lcd bolt instead of an ir3 bolt.... have you switched bolts with your lcd? if you have, your lcd bolt broke the cops rod, if not, your gun must have been fubar'd, send it to a tech.
-Erik
ShadowsOfTheFallen
10-22-2002, 01:30 AM
no, as far as i know they didnt use a bolt from an lcd. the rod isnt whats broken either, its the ribbon thing inside the cops sensor thats broken. neither of these are my markers though. the standard should be going out to a tech some time this week but i dont know what my friend is going to do with the C&C. but thanks for the help guys.
Frostbyte
10-22-2002, 01:41 AM
thats weird..... its prolly set ok, but whats your dwell on the markers? have you messed with it? give it a try b4 you spend money to get them fixed.
-Erik
Impulse08
10-22-2002, 04:02 PM
Im With the guy that said they r crap...
Angels are nice but ill take the advantages of an impulse over the ir3 anyway
strange imp all the way
:evilgrin:
WarpedKid02
10-22-2002, 04:17 PM
This is AOG, not IOG. We talk about Angel's here. Don't come in here and say they are crap and say they that an Impulse has a better advantage over an iR3. I can tell you right now that they don't.
paintballguy990
11-07-2002, 03:44 PM
go warped kid! look at an angel out of the box stock, then look at an impy out of the box stock ;) enough said there. if someone came in to play and had the choice between a strange impy and an Angel IR3 what the hell do you think theyd pick huh?
ShadowsOfTheFallen
11-07-2002, 05:44 PM
after playing a few games sunday with my friends c&c IR3, id rather use an IR3. it snap shoots so good because i dont know, it just does, atleast for me
C]-[iLDe
11-07-2002, 07:02 PM
Its the space frame, it forces you to hold your hands and elbows at a more narrow angle and allows you to tuck a little tighter with the same setup (as opposed to a 45 frame).